Application description

Pocket RTA Pro is a highly portable real-time spectrum analyser for your PC and iPAQ 110.

PocketRTA Pro has many advanced features which are normally only found in much more expensive sound analysis software, providing fast and accurate spectrum analysis suitable for both amateur hi-fi enthusiasts and professional A/V engineers. Uses include system calibration, monitoring of noise levels and testing of audio equipment.

PocketRTA samples sounds picked up by the built-in microphone on the iPAQ 110 or the input of your PC's sound card and then applies a Fourier Transform to the samples to obtain a frequency spectrum. The result is an accurate representation of the sampled sound broken down into its frequency components.

PocketRTA gives total control over input sample rate and FFT length, so you can tailor the display to your needs. Sample rates up to 44Khz allow frequencies of up to 22Khz to be measured. Various display modes include, linear narrow band, logarithmic narrow band, Octave, 1/3 Octave, 1/6 Octave, Sample, SPL and Spectrogram displays with ANSI A and C weighting curves. PocketRTA allows real-time magnification (up to 250 times) of a selected frequency range. The touch screen allows selection of the nearest FFT point giving a display of it's frequency and decibel level. Up to 64 times averaging and variable decay settings allow more stable readings for fluctuating or unstable input signals whilst our unique noise cancellation system allows you to remove unwanted background noise.

Pocket RTA Pro Features

PocketRTA Pro features the ability to calibrate the display using a 1/3 Octave display in order to compensate for imperfections in frequency response of the internal microphone. Capture any input signal and overlay it as a reference for a live signal. Captured traces can be saved and later loaded as a reference or exported to ASCII text for use in packages such as Microsoft Excel. You can even take snapshots of the screen which are saved in BMP format. PocketRTA Pro also introduces a Compare / Transfer mode which allows you to compare a captured input signal against a live trace. The difference between the two traces are displayed using a 0dB reference point making it ideal for calibrating EQ's. A smoothing option has also been added (wide band averaging) to remove unwanted spikes and make the display more readable. The ability to capture a peak trace over time. Again this can be saved or exported for use in external packages. Pink Noise has also been added to the Signal Generator.

It is now possible to increment the gain in 1db increments up to +/- 100db. 44Khz sampling allowing signals up to 22Khz to be measured. Dual Channel FFT display (PC version only). Definable FFT size and sample frequency (iPAQ 110 only). Single channel spectrograph Standard ANSI/IEC A and C weighting curves. Automatic noise cancellation. Automatic peak note / frequency and octave display. Narrow band Linear and Logarithmic scalable displays. Octave, 1/3 octave and 1/6 octave displays. SPL (Sound Pressure Level) display. 250x zoom for accurate analysis of narrow band data. Internal Signal Generator Touch screen plotting of nearest point with frequency and decibel readout.

Up to 64x averaging and smoothing to help stabilize the display. Peak trace facility for better reading of fluctuating frequencies. Selectable signal decay speeds. Selectable signal gain control. Pause facility freezes the live trace to aid analysis of data. 1/3 Octave Calibration of microphone. Capture Buffer - Allows loading, saving and comparison of data. Screen capture facility. Capture over time facility. Peak trace facility for better reading of fluctuating frequencies. Export captured data to text delimited files for PC analysis. Smoothing (wide band averaging). Compare / Transfer Mode.

Reviews